1) By the Ministry of Trade, Industry and Energy (Korea)

“Systems Engineering Approach to Designing Smart Condition Monitoring Systems for Smart Manufacturing”
Kee-Young Shin, Nam-Ho Shin, Sang-Woo Choi, and Se-Ho Choi (POSCO)

“Analysis of Pedestrian Collision Risk using Fuzzy Inference Model”
Kang-Hyun Jo, Joko Hariyono, Laksono Kurnianggoro, and Wahyono (University of Ulsan)

“A Framework and Test Bed for the Single-Living Senior Citizens Care: Access and Grave site Monitorings”
Jun-Ho Huh (Dankook University)

“Exposure Correction and Image Blending for Planar Panorama Stitching”
Sangil Lee, Seung Jae Lee, Jaehyun Park, and H. Jin Kim (Seoul National University)

“Path Tracking Control and Identification of Tire Parameters using On-line Model-based Reinforcement Learning”
Taewan Kim, and H. Jin Kim (Seoul National University)

2) By General Chair of ICCAS 2016

“Evaluation of Steering Model depending on Gazing Distance by using Driving Simulator”
Nobutomo Matsunaga, Daisuke Matsuno, Yuki Shida, and Hiroshi Okajima (Kumamoto University, Japan)

“Experiment of Robust Driving Assistance Control for Skid SteerWelfare Vehicle using Model Error Compensator”
Nobutomo Matsunaga, Tomoki Tanaka, Hirotaka Miyamoto, and Hiroshi Okajima (Kumamoto University, Japan)

“Development of Pipe Inspection Robot using Ring-type Laser”
Yasuto Tamura, Ichirota Kanai, Kazuki Yamada, and Hun-ok Lim (Kanagawa University, Japan)

“On Extended State Predictor Observer based Active Disturbance Rejection Control for Uncertain Systems with Sensor Delay”
Wenchao Xue, Ping Liu, Sen Chen, and Huang Yi (Chinese Academy of Sciences, China)

“Model Predictive Control-based Trajectory Planning for Quadrotors with State and Input Constraints”
Chen Songlin, and Lin Penghong (Harbin Institute of Technology, China)

“N-best List Re-ranking Using Semantic Relatedness and Syntactic Score: An Approach for Improving Speech Recognition Accuracy in Air Traffic Control”
Van Nhan Nguyen, and Harald Holone (Østfold University College, Norway)

“Nonlinear Control of Thermoacoustic Oscillations in Rijke-Type Systems”
Mahmut Reyhanoglu, William MacKunis, Krishna Bhavithavya Kidambi (Embry-Riddle Aeronautical Univ., United States), and Jaime Rubio Hervas (Infinium Robotics Pte Ltd, Singapore)

(By General Chair of ICCAS 2016)

“A Study on Modeling of a Hybrid Wind Wave Energy Converter System”
Tri Dung Dang (University of Ulsan, Korea)

“Arbitrarily Large Gain/phase Margin Can Be Achieved by DOB-based Controller design”
Hyuntae Kim (Seoul National University, Korea)

“Resource-Constrained Decentralized Active Sensing for Multi-Robot Systems using Distributed Gaussian Processes”
Kshitij Tiwari (Japan Advanced Institute of Science and Technology, Japan)

“3D Reconstruction of Structures using Spherical Cameras with Small Motion”
Sarthak Pathak (The University of Tokyo, Japan)

“Optimal Design on Policies of Industrial Eco-Economic System in China under the Constraint of Energy Saving and Carbon Emission”
Ying-bo Qin (Southeast University, China)

“Multi-point Fuzzy Prediction for Load Forecasting in Green Buildings”
Hsuan-Hao Chang (Yuan Ze University, Taiwan)

(By General Chair of ICCAS 2016)

“Occlusion-Robust Segmentation for Multiple Objects using a Micro Air Vehicle”
Asahi Kainuma (Akita Prefectural University, Japan)

“Prototype Development of On-Board Vision Processing Micro Air Vehicle for Wide-Range Monocular SLAM”
Shinya Ueda (Akita Prefectural University, Japan)

“Fuzzy Logic Self-tuning PID Controller Design Based on Smith Predictor for Heating System”
Hamed Khodadadi (Azad University of Khomeinishahr, Iran)

“Verification of Recovery Effect on Motor Function of Plegic Upper Limb after Stroke by UR-System 2”
Hitomi Hattori (Nagoya Institute of Technology, Japan)

“Design of Two Degree of Freedom Controller Using Data Conversion Method”
Shota Higuchi (Tokyo University of Science, Japan)

(By Organizing Chair of ICCAS 2016)

“Design of Planar Static Balancer Using Baranov Truss”
Sanghyung Kim (Chosun University, Korea)

“Substitution Strategy of the Rolling Contact Joints Kinematics for the Robotic Applications”
Sang-Hun Kim (Seoul National University, Korea)

“A Preliminary Result of Web-based User Study on the Emotion Expression of Social Robots”
Hye-Kyung Cho (Hansung University, Korea)

“Attitude determination and disturbance estimation based on adaptive Kalman filter for nano-satellite”
Sung Hyuk Choi Seoul National University, Korea)

“A preliminary study on stabilization of a parallel inverted pendulum by model predictive control”
Masanori Nakamoto (Osaka Prefecture University, Japan)

“Decoupled Disturbance Compensation Under Control Saturation with Discrete-Time Variable Structure Control Method in Industrial Servo Systems”
Ji-Seok Han (Seoul National University, Korea)

“Wind Turbine Main Bearing Fault Detection via Shaft Speed Signal Analysis under Constant Load”
Moussa Hamadache (Kyungpook National University, Korea)

“MPC based Steering Control for Backward Driving Vehicle using Stereo Vision”
Wansik Choi (Pusan National University, Korea)